1. The integrated design of the sink, side wall and pressure water ancestor has a solid structure and quick and easy installation on site.

2. Spreading the cone to spread the cloth, which can reduce the creases generated when the cloth travels, without curling.

3. The characteristics of the large curvature of the large net wheel, so that the tension of the cloth is reduced, and the area is stretched, and the spray gun is used for strong cleaning, which is a better cleaning effect.

4. The synchronizing device is a new type of electronic tension controller with a sensitive weight sensing range, numerical tension, easy adjustment, and scientific basis.

5. The tooth-extracting device before grouting ensures the flatness of the cloth before it enters the paddle wheel.

6. The high-precision rounding wheel can be made of stainless steel or banana. It can avoid selective adsorption and achieve uniform pressing.

7. Automatically control the heating system, and set the automatic rapid heating as needed.

8. It is heated by external heat exchanger and matched with the auxiliary circulation of water pump. The heating effect is good, and the temperature in the tank is more uniform. There is no high noise and vibration caused by general direct steam heating, which is easy to operate and maintain.

9. The water pump in each tank is assisted by strong circulation, which forms an energy-saving and water-saving system for the whole machine, a water supply and a water outlet.

10. Each cloth wheel in the tank has independent motor drive, and it can effectively control the shrinkage rate of the cloth with the electronic tension controller.